Fin Line

FP-1A Fin Press

FP-1A-Shuttle-Stacker

The Oak FP-1 fin production line provides a reliable, cost effective fin making solution. Versions of this press are found in coil shops throughout the world, and continue to supply dependable production. This 30 ton “C” frame style press and line consistently produces quality fins. From reliable stock feed to damage-free fin collection, design elements lead to quality parts and longer tool life.

A hydraulic withdrawal feature incorporated into the press slide gives access to the inner tooling of the fin stamping die without removing it from the press.

The FP-1 fin press and line allows for the production of quality fins ranging from 1 to 108 inches long using fin stock with a maximum width of 18 inches. The press has a bed opening of 30 x 20 inches and can accommodate fin dies with a shut-height range of 8 1/2 to 10 1/2 inches. The standard stroke length offered on the FP-1A Fin Press is 1 1/2 inches. Press modifications allow for a maximum stroke length of 2 inches if taller collar heights are required.

Machine Specifications

FP-1A Standard Suction Unit

FP-1A Standard Single Uncoiler

PRODUCTION

250 to 280 SPM using a 2 progression fin die

FOOTPRINT

3 M x 5.6 M

WEIGHT

4,600 KG

Foundation information supplied upon request

POWER

Phase: 3, Continuous Amps: 46,
KW: 29, Control: 24 VDC
Voltage Range: 380 to 415 Volt, Frequency: 50 cycle

Phase: 3, Continuous Amps: 46,
KW: 29, Control: 24 VDC
Voltage Range: 440 to 500 Volt, Frequency: 60 cycle

AIR

60 CRM at 85 psi

Click on a tab below to view our
Standard Machine Components, Machine Capabilities, and Additional Options available.

Standard Machine Components

Hydraulic Withdrawal	Allows access to the inner tooling of the fin stamping die without removing the die from the press.

Uncoiling System	This uncoiler, of the pinch roll feed type, maintains a free stock loop paying into the press. It is controlled by a photo-electric sensor to coincide with the press operating speed. >> More Information

Die Lubrication System	Provides lubricant to the fin die.

Suction Unit	The current standard upper suction unit is 1 ½ horsepower, but 5 horsepower fixed or 5 horsepower variable speed units are also available. Double units are available for extreme material and part design.

Stacker Unit	As fins are manufactured and dropped to the fin stacker, the Programmable Logic Controller (PLC) counts fins and stops the press when a predetermined amount of fins have been created. Various types of fin stackers are available to suit your needs. >> Rotary Stacker >> Shuttle Stacker >> Cart Stacker

Machine Capabilities

Fin Lengths	1" - 108" (25mm to 2742mm)

Maximum Fin Width	18" (457mm) (FP-1A Fin Press) 25" (660mm) (FP-2B-36 Fin Press) 40" (1016mm) (FP-2B-48 Fin Press) 46" (1170mm) (FP-3B Fin Press)

Shut Height	8.5" (216mm) to 10.5" (267mm) (FP-1A Fin Press) 9" (229mm) to 13" (330mm) (FP-2B Fin Press, FP-3B Fin Press)

Standard Stroke	1.5" (38.1mm) to 2" (50.8mm)

Additional Options

We offer an extensive line of options to meet your specific fin production needs, including:
Die Pierce Punch Lubrication System	Recommended for additional lubrication to the pierce punches and dies.

Die Enhancement Lubrication System	Recommended for additional lubrication to the enhancement punches and dies.

Standard Fin Die Injector Lubrication System	May be included as an alternative to both the Pierce Punch and Enhancement Lubrication Systems.

Fin Stock Lubrication Filtration System

Fin Stock Lacer and Guide	This device laces the new aluminum strip through the die by push button control. It then functions as a stock guide.

Fin Line Feed System	There are many feed system options available, including: Direct Drive Progression Changer 2:1 - Allows for the switch from double to single progression. Progression Changer 4:3 - Allows for the switch from quadruple to triple progression..

Single Row Fin Options	Single row fins have unique characteristics that require special suction and fin stacker unit options.

Fin Blow Down	This option may be included to complement the suction unit when manufacturing lightweight fins.

Fin Line Dual Wire Tap Down System	This option may be included to complement the suction unit when manufacturing lightweight fins and small hole diameters.

Fin Die Auto Slit Selector Mechanism	This automatic system is used to determine the needed adjustment to the die slitter blades from various row productions in less than 1 minute. This works in conjunction with the fin die.

Fin Die Auto Edge Trim Selector Mechanism	This mechanism actuates the quick adjustment of the die edge trim blades to match stock width requirements.

Fin Die Take Out System (Not available for FP-1A)	For quick and easy removal of the die from the press.

Fin Line Scrap Transfer Conveyor System	This option uses a conveyor system to collect the material discarded during press operation.

Fin Line Scrap Collector System	This system is used to collect the material discarded during press operation.

Fin Press Vibration Isolators	This option isolates the press from the floor to reduce vibration. It also provides support and levels the machine. The vibration isolators also allow the press to be relocated in your facility with minimal foundation preparation.