Coil Form

Vertical Arbor Type Coilform

Coil_Form_Electric

Our coilform machines produce high-quality bends in coils. Recent innovations have provided the ability to make bends that were previously impossible when using very low-strength, enhanced fin designs. These machines will form single row coils or multiple single-row coils joined at one end.

The Vertical Arbor Coilform Machine incorporates a single, vertically oriented bend arbor that produces one, two, or three 90 degree bends, which create L-, U-, or Box-shaped coils. The cycle time required to produce a single bend - after the coil has been loaded and positioned - is approximately 12 seconds. The vertical arbor technique leaves the mechanical bond between the fin and tube undisturbed, ensuring maximum heat transfer.

Machine Specifications

Two Bend Coil

Three Bend Coil

PRODUCTION

1 minute for a single row 3 bend coil

Includes time required for loading, machine processing and unloading.

FOOTPRINT

216" Long, 135" Wide, 95" Tall

WEIGHT

6,000 LBS (2,722 Kg)

Foundation information supplied upon request

POWER

No Hydraulics
No Compressed Air Hookups
No water Hookups

*Special Voltage Transformer Option Available*

380- 480 V, 3 Phase, 50-60 Hz

Click on a tab below to view our
Standard Machine Components, Machine Capabilities, and Additional Options available.

Standard Machine Components

M14 - Electric

New Standard Machine.

Electrically actuated

Larger Capacity

0-90 degree bend angles

Can make multiple bends in the coil

Programmable set up

Machine Capabilities

Coil Types	RTPF Single 1+1 Row Coil 1+1+1 Row Coil Micro Channel Coil (MCHX)

Capacity	Up to 0" Wide 118" (3M) Long

Additional Options

We offer an extensive line of options to meet your specific fin production needs, including:
Slip Sheets	Reduces fin damage between rows Not necessary for single row or MCHX coils

Coil Length Measurement	Holds a tighter tolerance on the first leg length instead of the last leg.

Inside Coil Pusher	Holds the inner row of a multi-row coil in place during consecutive bends Not needed for one bed, single row, or MCHX coils.

Bar Code Scanner	Scans bar codes of incoming coil slabs Automatically selects appropriate part data Eliminates mismatching

Coil Staging Table