Coil Form

Vertical Arbor Type Coilform

 

Coil_Form_Electric

Our coilform machines produce high-quality bends in coils. Recent innovations have provided the ability to make bends that were previously impossible when using very low-strength, enhanced fin designs. These machines will form single row coils or multiple single-row coils joined at one end.

The Vertical Arbor Coilform Machine incorporates a single, vertically oriented bend arbor that produces one, two, or three 90 degree bends, which create L-, U-, or Box-shaped coils. The cycle time required to produce a single bend - after the coil has been loaded and positioned - is approximately 12 seconds. The vertical arbor technique leaves the mechanical bond between the fin and tube undisturbed, ensuring maximum heat transfer.




 

 

Machine Specifications

 

Coil_Two_Bend
Two Bend Coil
Coil_Three_Bend
Three Bend Coil
PRODUCTION
1 minute for a single row 3 bend coil
Includes time required for loading, machine processing and unloading.
FOOTPRINT
216" Long, 135" Wide, 95" Tall
WEIGHT
6,000 LBS (2,722 Kg)
Foundation information supplied upon request
POWER
No Hydraulics
No Compressed Air Hookups
No water Hookups
*Special Voltage Transformer Option Available*
380- 480 V, 3 Phase, 50-60 Hz

 

 

 

 

 

 

 

 

 

 

 

 

Click on a tab below to view our
Standard Machine Components, Machine Capabilities, and Additional Options available.

Standard Machine Components

M14 - Electric

New Standard Machine.

Electrically actuated

Larger Capacity

0-90 degree bend angles

Can make multiple bends in the coil

Programmable set up

Machine Capabilities

 
Coil Types

RTPF Single
1+1 Row Coil
1+1+1 Row Coil
Micro Channel Coil (MCHX)

 
Capacity Up to 0" Wide
118" (3M) Long

 

Additional Options

 

We offer an extensive line of options to meet your specific fin production needs, including:
Slip Sheets

Reduces fin damage between rows

Not necessary for single row or MCHX coils
Coil Length Measurement Holds a tighter tolerance on the first leg length instead of the last leg.

 
Inside Coil Pusher

Holds the inner row of a multi-row coil in place during consecutive bends

Not needed for one bed, single row, or MCHX coils.

 
Bar Code Scanner

Scans bar codes of incoming coil slabs

Automatically selects appropriate part data

Eliminates mismatching

 
Coil Staging Table