Articles
Stock Machines
Oak Machines in Stock
Burr Oak Tool has the following dies and machines in stock, available for expedited shipment.
They are new, never used in production and carry a full warranty.
Contact us for exact specifications, competitive prices and shipment details.
Click on a tab below to see current stock machines. Click on image for larger view.
Fin Dies
| FDM-1479-3 |
|---|
|
|
|
7mm O.D. x 19mm x 11mm Staggered Pattern, 60 Rows x 2 Progression, 4 Draws, Special Tool Steels, Collar Height Range: 1.2mm to 2mm, Raised Collar Base, Surface Enhancement: Opposed Louvers on Flat Surface, End Notch Station (Gaggable), Middle Notch Station (Gaggable), Plain Slit and Edge Trim Blades
|
|
|
| FDM-1479-6 |
|---|
|
|
|
7mm O.D. x 19mm x 11mm Staggered Pattern, 60 Rows x 2 Progression, 4 Draws, Special Tool Steels, Collar Height Range: 1.2mm to 2mm, Raised Collar Base, Surface Enhancement: Opposed Louvers on Flat Surface, End Notch Station (Gaggable), Middle Notch Station (Gaggable), Plain Slit and Edge Trim Blades |
|
|
| FDM-1482-1 |
|---|
|
|
|
7mm O.D. x 19mm x 11mm Staggered Pattern, 72 Rows x 2 Progression, 4 Draws, Special Tool Steels, Collar Height Range: 1.2mm to 2mm, Raised Collar Base, Surface Enhancement: Opposed Louvers on Flat Surface, Special Tool Steels, Collar Height Range: 1.2mm to 2mm, Raised Collar Base, Surface Enhancement: Opposed Louvers on Flat Surface |
|
|
Expander
| CSE-M615-1050-1 |
|---|
|
|
|
Compact Single Expander with Heavy Duty Lift Assembly w/Fixed Enclosures Self-Storing Back Plate w/Powered Height Adjustment (Cylinder Drive) Siemens PLC And Touch Screen 3/8 - 1.000 x .866 Staggered Min Coil Height: 12" Max Fin Length: 50" Power: 480 V, 3 Phase, 60 Hz Control: 24VDC |
STCO
Check out our in-stock dies and machines, available for expedited shipment.
Visit us in Brazil at FEBRAVA 2013. Booth #B61.
